SLES 11 SP4
Sponsored Link

Configure DHCP Server
2015/11/28
 
Configure DHCP ( Dynamic Host Configuration Protocol ) Server. DHCP Server uses 67/UDP.
[1] Install and configure DHCP Server.
dlp:~ #
zypper -n install dhcp-server
dlp:~ #
vi /etc/sysconfig/dhcpd
# line 15: specify network interface which is used by DHCPD

DHCPD_INTERFACE="
eth0
"
dlp:~ #
mv /etc/dhcpd.conf /etc/dhcpd.conf.org

dlp:~ #
vi /etc/dhcpd.conf
# create new

# specify domain name

option domain-name     "srv.world";
# specify DNS server's hostname or IP address

option domain-name-servers     dlp.srv.world;
# default lease time

default-lease-time 600;
# max lease time

max-lease-time 7200;
# this DHCP server to be declared valid

authoritative;
# specify network address and subnet mask

subnet 10.0.0.0 netmask 255.255.255.0 {
   
# specify the range of lease IP address

    range dynamic-bootp 10.0.0.200 10.0.0.254;
   
# specify broadcast address

    option broadcast-address 10.0.0.255;
   
# specify default gateway

    option routers 10.0.0.1;
}
dlp:~ #
/etc/init.d/dhcpd start

dlp:~ #
chkconfig dhcpd on

 
Tweet